EVO-T Compact

Application:

• Heating of supply air in air conditioning and ventilation systems
• Heating of process air in industry-grade air conditioning and ventilation systems

• Copper tubes; aluminium fins (standard) additionaly protected by epoxy coating (EVO-P)
• Galvanized metal sheet or stainless (EVO-P) frame
• Mainfolds and connectors made of copper or steel respectively
• Exchanger connection stub pipes fitted with drain and vent
• Number of rows: 1 ÷ 6
• Distance between fins: 1,8 / 2,0 / 2,5mm
• Fin thickness: 0,1mm
• Tube wall thickness: 0,37mm
• Tube diameter: 3/8” ÷ 5/8”

Exchanger medium connection:

• Connection stub pipes are on the service side of the unit.
• Medium connection from top or bottom exchanger in order to maintain medium counter flow direction according to the air flow direction.

(Conformance to standards: EN 308, EN 1216, EN 13053)

• Max. medium temperature: 120°C
• Max. medium working pressure: 1,6MPa = 16bar (tested 21 bar)
• Max. permitted air flow speed: v = 4,6m/s
• Max. glycol content: 50%
• Min./max. temperature of the air: - 40/60°C
• Protection: permissible minimum temperature of air downstream heat exchanger is monitored by freezing protection thermostat (optional)
• Heating capacity, pressure losses, etc. available in KAD software

• Cooling of supply air in air conditioning and ventilation systems
• Cooling of process air in industry-grade air conditioning and ventilation systems
• Dehumidyfing of process air in industry-grade air conditioning and ventilation systems

• Copper tubes; aluminium fins (standard) additionaly protected by epoxy coating (EVO-P)
• Galvanized metal sheet or stainless (EVO-P) frame
• Mainfolds and connectors made of copper or steel respectively
• Exchanger connection stub pipes fitted with drain and vent
• Number of rows R: 2÷12
• Distance between fins: 2,5 mm
• Fin thickness: 0,1mm
• Tube wall thickness: 0,37 mm
• Tube diameter: 3/8” ÷ 5/8”
• Droplet eliminator mounted downstream after the cooler
• Triple sloped drain pan made of stainless steel, buil-in AHU floor
• Drain pan equipped with polypropylene ball siphon

(Conformance to standards: EN 308, EN 1216, EN 13053)

• Min. temp. of the medium: +2°C*
• Max. working pressure of the medium: 1,6MPa = 16bar (tested 21 bar)
• Max. glycol content: 50%
• Max. permitted air velocity: v = 4,0 m/s
• Cooling capacity, pressure drop, etc. available in KAD

• Heating of supply air in air conditioning and ventilation systems
• Heating of process air in industry-grade air conditioning and ventilation systems
• Preheating air in air hanglin units

• Single or multi-stage heating components
• Radiator heaters combined in groups
• Casing: framework made of galvanized metal sheet
• Connection to terminal strip
• Overheating protection thermostat (standard)

Exchanger connection

• Connecting the wires to the terminal strip of the heater are on the service side of the unit

• Rated voltage: 3 x 400V
• Min. / max. rating capacity: 4 ÷ 168kW
• Permitted min. air velocity: v = 1,5m/s
• Max. permissible ambient temperature around heating components: 65°C

Application

• Installed in-to the AHU to ensure noise reduction downstream of the fan set

Type

• SLC_STD (standardowy)
• SLC_HEFF (wyższa skuteczność)

• The block is fitted with silencing cartridges made of non-flammable mineral wool, 100 or 200mm thick
• The surface of wool insert protected with veil
• Mineral wool fulfillment is built by galvanized metal sheet frame (add. pliester coated EVO-H)

Max. permitted air velocity: v = 4,5m/s

Roof / Intake / Outtake

• For outside unit is delivered roof and component of the intake and outtake
• Components with water drainage to the side opposite from the viewing side can be additionally installed on AHU

Door Locks and Handles

• Easy to use door locks and handles ensure safe unit maintenance

Inspection window

• Inspection window enables to observe unit‘s internal operation. The diameter of plastic porthole is 200mm
• The porthole could be use with darkwork (in option)

Internal lighting

• Internal lighting enables to observe unit‘s internal operation through inspection window.
• Economy light is used with switch outside the unit